repair manual for a similiar Canon printer, the iR, on Ebay for $ to $ and this will tell you how to take apart the printer. I had the same. imageCLASS D – Canon Inc. Canon Imageclass D Service Manual Ebook Canon Imageclass D Service Manual currently available. I have a Canon ImageClass D and repair parts but have no service manual, instructions or diagrams. Canon USA is of No Help on this- they.
|Published (Last):||21 July 2004|
|PDF File Size:||3.30 Mb|
|ePub File Size:||17.52 Mb|
|Price:||Free* [*Free Regsitration Required]|
If “Prohibit” is selected, the receiver does not fall back. Set “Long distance 1 ” when registering the one-touch speed dialing and coded speed dialing transmission mode. Transmission was attempted, and polling reception was started because the document was not set correctly. Replace the original separation pad or the rollers of the separation roller unit.
If you do not have the protective bag or shipping box for the cartridge, store the cartridge in a dark location. Check it to make sure that the print pattern is free of white line or uneven density. T Paper 3 Is the paper placed correctly? F Use interface cables that comply with specifications of the machine.
F  5 Push off the claw  of the bushing rear in the direction of A, and draw the bushing rear  in the direction of B till the bushing goes out of the feeder frame .
Replace the pressure spring of the original separation pad. Press ‘4’ on the keypad.
Action 1 Malfunction Turn off the power; wait for 10 min, and turn on the power. If you disconnect the jumper plug JP1 of the image processor PCB and turn off the power, all control data will be manuaal to default settings.
T Gear in drive assembly; for fixing plessure roller, delivery roller drive 8 Is any of the gears of the drive assembly used to drive the fixing pressure roller, delivery roller cracked or damaged?
ADF not used The laser beam generated by the laser unit based on the signals from the DC controller PCB moves through the collimator lens inside the laser unit and the cylindrical lens to reach a 4-face polygon mirror rotating at a constant speed. Imageclaas line condition detection time length refers to the length between when the dial signal is transmitted and when the line condition is cut in relation to the transmitting side, while it is the length between when the DIS signal is transmitted and when the line is cut in relation to the receiving side.
T Transfer guide Chapter 13 3 Is the surface of the transfer guide soiled with toner? The paper separated from the photosensitive drum is moved to the inside of the fixing assembly; the paper is then moved outside it after the toner is fused to the paper by the work of the fixing film and the fixing pressure roller. When the host machine’s Start key is pressed, with an original placed in the original tray, the ADF motor starts to rotate counterclockwise and the pickup imagecllass moves down to move up the original stopper.
Setting the Image Quality You can adjust image quality to the appropriate level best manuwl for a document with text or photos. An echo of CFR prevents reception of the training signal. A press on the Function key will cause it to serve as the Fax Function key. The line condition is poor, and the image signal cannot be received correctly. If the photosensitive drum is the case, replace the cartridge. Advise the user on the number of originals that may be paled in the original placement assembly.
Do not  F T Original 3 Is the original curled or do originals bond together because of static charge? YE Advise the user to use recommended paper. Is the toner image developed on the drum surface?
Canon imageCLASS D Manual
T Connector 6 Is the connection of the following controller normal: Provides a description of a service sevice.
Some models use 4 decimal characters throughwhile some use 3 decimal characters through Systems Incorporated website http: Do not replace any battery with one not indicated for the machine, i.
Chapter 7         F 7. Troubleshooting Chapter 6 Troubleshooting Clearing Jams This section describes how to remove jammed paper from the main unit, paper cassette, ADF, and multi-purpose tray.
Sensor Detection It detects imagedlass state of the sensors in the pickup assemblies and the printer block, thereby monitoring the drive assembly.
Do not srevice the setting. Adjusting a Cassette to Hold a Different Paper Size If you want to load a different paper size in the cassette, follow the procedure described below to adjust the cassette guides. If you are visiting in response to a report, try to obtain a system dump list for a. Do not clean the photosensitive drum.
Document and paper handling In phase 3 or phase 4, the other party cannot receive the signal correctly, and disconnect the line. When the machine detects a jam, it will turn off the main motor M1 and will indicate a jam message on the LCD.
If set to ‘1’ on the other hand, all items may be set by the user, regardless of the country setting. If short circuiting and resetting are repeated, the internal fuse F1, F2, F can melt. Leading edge margin L feeding manuwl Copy of the test sheet F 3 Press the Additional Functions key and the key to start service mode.
Avoid areas subject to direct sunshine e.
Canon imageCLASS D Service manual |
Replace the Fixing assembly. The other party is not connected to the line, or is not turned on so that the transmission did not arrive. In a memory full condition, a call arrived when a original was set i.