INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Published (Last):||11 July 2010|
|PDF File Size:||4.11 Mb|
|ePub File Size:||20.32 Mb|
|Price:||Free* [*Free Regsitration Required]|
Consult your International Paint representative for details. Consult your International Paint representative for specific recommendations. Do not exceed pot life limitations.
Interline A two pack epoxy holding primer. Use International GTA only in exceptional circumstances. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. Intefline by brush is recommended for small areas only. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information.
Use in accordance with the standard Worldwide Marine Specifications. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards.
Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays.
These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Material is supplied in 2 containers as a unit. Subject to re-inspection thereafter. Petersburg, Russia, phone: Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet.
Do not allow material to remain in hoses, gun or spray equipment. Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Multiple coats may be required to achieve specified film thickness.
Application by roller is recommended for small areas only. As application, environmental knterline design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating. DO NOT thin more than allowed by local environmental legislation. Based on this, products supplied in different territories may not be approved to all of the standards listed above.
Store in dry, shaded conditions away from sources of heat and ignition. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal intfrline equipment and adequate local exhaust ventilation. Take precautions to avoid skin and eye contact ie.
Recommended Tip Range 0. International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried. Always mix a complete unit in the proportions supplied. Products Marine Coatings Marine chemicals Marine lubricants. The history and age of the steel and the method of working can have a significant effect on the paint consumption.
It is good working practice to periodically flush out spray equipment during the course of the working day. Consult your local International Paint representative for specific recommendations. Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme.
Apply in good weather. Marine Coatings Marine chemicals Marine lubricants. VOC ingerline are typical and are provided for guidance purposes only. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments. Consult your International Paint representative for the system best suited for the surfaces to be protected.
Thoroughly flush all equipment with International GTA Clean all equipment immediately after use with International GTA All surfaces to be coated should be clean, dry and free from contamination.
A two pack epoxy holding primer. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product.
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units.
Interline | Litnobiles
Overcoating information is given for guidance only and is subject to regional variation depending upon local climate interrline environmental conditions. Actual safety measures are dependant on application methods and work environment. The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration and ventilation rates.